Products

ARMA-flex high pressure hose for connecting cylinders to manifolds and point valves NGP specialises in made to order custom lengths. Because NGP assembles and tests ARMA-flex in the factory, we can make any length (up to approximately 25 metres) and give you a same...

This adapter screws on to a non-refillable MAPP gas LPG/propane cylinder. The ¼" NPT male thread then allows easy connection to a range of equipment options.

For converting a regulator with a M12 connection to M10. The adapter allows an Oxygen regulator to be converted to a M10 male fitting Made from brass. Comes with O-ring for sealing on the M10 female side

Adaptor – 5/8"-18 LH Nut to 1/4" NPT Converts 5/8"-18 LH connections to 1/4" NPT Typically used to connect to hoses with a 1/4" NPT female fitting

Converts AS/NZ 5/8″-18 LH thread to 9/16″-18 LH Female thread: 5/8″-18 LH Male thread: 9/16″-18 LH If your jeweller’s torch from the USA uses 9/16″-18 Type B fittings, this adaptor lets you connect it to an AUS/NZ regulator with a 5/8″-18 LH outlet. Simply...

Adaptor – 5/8"-18 RH Nut to 1/4" NPT Converts 5/8"-18 RH connections to 1/4" NPT Typically used to connect to hoses with a 1/4" NPT female fitting

Converts AUS/NZ 5/8″-18 RH thread to 9/16″-18 RH Female thread: 5/8″-18 RH Male thread: 9/16″-18 RH If your jeweller’s torch from the USA uses 9/16″-18 Type B fittings, this adaptor allows you to connect it to an AUS/NZ regulator with a 5/8″-18 RH outlet....

Connects 'A' size hoses Some USA suppliers use compact ‘A’ size fittings on specialised lightweight welding hoses. This adaptor bridges the two standards so you can pair these hoses with your existing AUS/NZ equipment. Nut connection: 5/8-18 LH Male thread: ‘A’ size (3/8-24 LH)

Connects 'A' size hoses Some USA suppliers use compact ‘A’ size fittings on specialised lightweight welding hoses. This adaptor bridges the two standards so you can pair these hoses with your existing AUS/NZ equipment. Nut connection: 5/8-18 RH Male thread: ‘A’ size (3/8-24 RH)

Thread adaptor – 9/16″-18 LH nut to 1/4″ NPT male End 1: 9/16″-18 LH nut with internal conical nipple seat End 2: 1/4″ NPT male Construction: Brass Application: Enables compatibility between 9/16″-18 LH and 1/4″ NPT fittings

Thread adaptor – 9/16″-18 RH nut to 1/4″ NPT male End 1: 9/16″-18 RH nut with internal conical nipple seat End 2: 1/4″ NPT male Construction: Brass Application: Enables compatibility between 9/16″-18 RH and 1/4″ NPT fittings

Converts American torches to AUS/NZ 5/8″-18 LH thread (Fuel) Female thread: 9/16″-18 (USA "B" size) Male thread: 5/8″-18 Gas torches, bead torches, and other equipment purchased online or from overseas can now be easily converted to Australian and NZ standard welding threads using this...

Converts American torches to AUS/NZ 5/8″-18 thread Female thread: 9/16″-18 (USA "B" size) Male thread: 5/8″-18 Gas torches, bead torches, and other equipment purchased online or from overseas can now be easily converted to Australian and NZ standard welding threads using this handy adaptor....

Adaptor – 3/8″ BSP LH to 5/8″-18 LH Designed for connecting equipment with a 3/8″ BSP LH nut and cone face to a 5/8″-18 LH male thread. This adaptor converts a 3/8″ BSP LH hose connection to fit a regulator with a 5/8″-18 LH...

Thread adaptor – 1/4″ male to 5/8″-18 Designed for connecting equipment with a 1/4″ male thread to fittings with a 5/8″-18 thread. This adaptor converts the outlet to enable compatibility between the two thread types. Thread: 1/4″ male to 5/8″-18 male Application: Enables connection...

Thread adaptor for 1/4″ male to 5/8″-18 connection Designed for connecting equipment with a 1/4″ male thread to fittings that use a 5/8″-18 thread. This adaptor converts the outlet to enable compatibility between the two thread types.

Outlet bushing Brass adaptor with male CGA555 LH thread and internal seat. Other end, ½" NPT male

Thread adaptor for M14 male to 5/8″-18 LH connection Designed for converting a gas torch or other equipment with an M14 male thread to a 5/8″-18 LH male connection. Thread: M14 male to 5/8″-18 LH male Application: Enables compatibility between M14 and 5/8″-18 LH...

Air (Type 60) — Cylinder Connector Thread: W27×2 RH external, 14 TPISealing: Internal angled sealing face, thread O.D. 27.0 mm, centre hole 18.2 mm × 8.1 mm deepGases: AirConstruction: Comprising nut and nippleMaterials: Available in brass, chrome‑plated brass, and stainless steelStandard: Manufactured to AS...

FLEX-Coil Medical Air Inlet: Yoke (Pin Index) - Air Outlet: 1/2" BSP Materials Yoke – Aluminium Tube – copper Nipple – brass Nut – brass Cleaned for Oxygen service