Products
-
-
-
-
-
-
Vendor: Niche Gas ProductsCarbon Dioxide high pressure. 50mm, 1/4″ NPT male connection Colour coded WIKA safety gauge
- $66.00
- $66.00
- Unit price
- per
-
-
Vendor: Niche Gas Products
0-30,000 kPa, 0-4,000 psi Acetylene
Carbon Dioxide (CO2) high pressure. 50mm, 1/4″ NPT male connection Colour coded WIKA safety gauge -
Vendor: Niche Gas Products
0-40,000 kPa, 0-6,000 psi Oxygen
Oxygen extra high pressure. 50mm, 1/4″ NPT male connection WIKA safety gauge -
-
Vendor: Niche Gas Products
0-4000 kPa, 0-575 psi Acetylene
Acetylene high pressure. 50mm, 1/4″ NPT male connection Colour coded to indicate “FULL” and “NEAR EMPTY” WIKA safety gauge -
Vendor: Niche Gas ProductsLow pressure gauge for Argon, argon mixtures and CO2. 50mm, 1/4″ NPT male connect WIKA safety gauge with metal case For replacement of any flow gauge that has an orifice in the outlet of the regulator. The orifice has been calibrated to the flow...
- $33.00
- $33.00
- Unit price
- per
-
-
Vendor: Niche Gas ProductsIdeal for crimping jewellery torch hose Use claw pliers or similar to squeeze the neck of the ear. The bands slide inside each other to create a round connection, not oval
- $1.82
- $1.82
- Unit price
- per
-
Vendor: Niche Gas Products
1/8"NPT to 3/8"-24 LH (A-Type)
A-Type outlet adaptor (3/8″-24) for USA-sourced torches and regulators Suitable as an outlet connection for regulators or an inlet connection for torches sourced from the USA. A-Type (3/8″-24) is a common hose thread used on American-made equipment. Designed for fuel gases including acetylene, LPG,...- $18.15
- $18.15
- Unit price
- per
-
Vendor: Niche Gas Products
1/8"NPT to 3/8"-24 RH (A-type)
A-Type outlet adaptor (3/8″-24) for Oxygen & Inert gases Suitable as an outlet connection for regulators or an inlet connection for torches sourced from the USA. A-type (3/8″-24) is a common hose thread used on American-made regulators and equipment. Designed for Oxygen and inert...- $18.15
- $18.15
- Unit price
- per
-
Vendor: Niche Gas Products10 mm Barb to 1/4″ NPT Female Suitable for use with 10 mm ID hose (e.g., welding hose). Ideal when a 1/4″ NPT connection is required in place of a standard 5/8″-18 thread.
- $13.20
- $13.20
- Unit price
- per
-
Vendor: Wika
16,000 kPa (160 bar), set trigger 12 bar contact gauge
Wika contact gauge for signalling a fixed lower limit of cylinder contents. When the cylinder contents falls to 1,200 kPa, the set point is triggered. This is an indication only and gives enough time for a new cylinder to be organised. Connect the cable...- $159.50
- $159.50
- Unit price
- per
-
Vendor: Niche Gas Products
3.2mm ID rubber welding hose - twin
This hose has been specially imported from Europe by NGP to satisfy a growing demand for a high quality, super light-weight welding hose. Light-weight torches become less ‘light-weight’ when you need to connect up standard 5mm ID hoses to them. It kind of defeats... -
Vendor: Wika
30,000 kPa, Adjustable contact gauge
Model 131.11.050 adjustable contact gauge for signalling a pre-selected lower limit of cylinder contents. The supplied key is used to set the pressure point, corresponding to the needle position. Connect the cable to alarm panel or signalling system. Contact completes the circuit to alert...- $654.50
- $654.50
- Unit price
- per
