High Pressure Gas Hoses
NGP offers a choice of two types of high pressure gas hoses for use with compressed gases. NGP assembles and tests completed hose assemblies locally:
LifeGuard Safety Hose – the future of hose and a first choice for many gas suppliers around the globe. LifeGuard incorporates an internal safety cable that eliminates ‘whip’ should an assembly rupture, stretch, or experience end coupling separation. Gas is shut off in both directions. This patented hose system is made under license in Sweden and NGP is the exclusive agent for Australia/NZ. Available in a range of pressures, lengths, ID’s, liners, materials.
ARMA-flex high pressure hose – locally assembled from quality imported double braided stainless steel hose. MWP 3500psi. Liner options are 1/4″ PTFE or ETFE. Almost any length possible with a range of cylinder and manifold connection options
Check out ‘Life Guard Safety Hoses’ page for more information.
-
Vendor: Superior Products, LLC
Hose, CRYOGENIC N2 service, stst, CGA295 nut ends. 1.8m
Cryogenic Hose Assembly The cryogenic hose features a double-insulated, heavy-wall (1" I.D.) stainless steel construction, making it suitable for nitrogen service. It is fitted with CGA295 female ends for connection to dewars and similar equipment, with a working pressure of 500 psi and an...- From $35.00
- From $35.00
- Unit price
- per
-
Vendor: Niche Gas Products
⅜" PTFE, 125 bar convoluted hose with 304L braid
Rated to 125 bar working pressure, this hose is ideal for larger lines after a regulator where higher flow rates and additional flexibility is required. Alternatively to replace rubber lines where extra robustness is necessary. NGP make these to order to any length. Suitable... -
Vendor: Niche Gas Products
½" PTFE, 110 bar convoluted hose with 304L braid
Rated to 110 bar working pressure, this hose is ideal for larger lines after a regulator where higher flow rates and additional flexibility is required. NGP make these to order to any length. Suitable for most technical gases All components are 316L and end... -
Vendor: Niche Gas Products
½" PTFE, 120 bar smoothbore hose with 304L braid
Rated to 120 bar working pressure, this hose is ideal for larger lines after a regulator where higher flow rates are required. NGP make these to order to any length. Suitable for most technical gases All components are 316L and end fittings can be... -
Vendor: Niche Gas Products
Acetylene. Type 20. Length: Custom - up to 25 metres
ARMA-flex high pressure hose for connecting cylinders to manifolds and point valves NGP specialises in made to order custom lengths. Because NGP assembles and tests ARMA-flex in the factory, we can make any length (up to approximately 25 metres) and give you a same... -
Vendor: Niche Gas Products
Acetylene. Type 20. Length: 800mm
ARMA-flex high pressure hose for connecting cylinders to manifolds and point valves Features Part No: NGP1516-800 Gas: Acetylene MWP (Bar): 207 Bar (4:1 burst) Hose Liner: Teflon (PTFE) Outer: Double S304 braid Inlet: Type 20. 200 Bar @ 15°C (AS2473.2) Outlet: 3/8” BSP LH... -
Vendor: Niche Gas Products
Acetylene. Type 20. Length: 1.8 metres
ARMA-flex high pressure hose for connecting cylinders to manifolds and point valves Features Part No: NGP1516-1800 Gas: Acetylene MWP (Bar): 207 Bar (4:1 burst) Hose Liner: Teflon (PTFE) Outer: Double S304 braid Inlet: Type 20. 200 Bar @ 15°C (AS2473.2) Outlet: 3/8” BSP LH... -
Vendor: Niche Gas Products
Air. Type 60. Length: Custom - up to 25 metres
ARMA-flex high pressure hose for connecting cylinders to manifolds and point valves NGP specialises in made to order custom lengths. Because NGP assembles and tests ARMA-flex in the factory, we can make any length (up to approximately 25 metres) and give you a same... -
Vendor: Niche Gas Products
AIR. Type 60. Length: 1.8 metres
ARMA-flex high pressure hose for connecting cylinders to manifolds and point valves Features Part No: NGP1517-1800 Gas: Air MWP (Bar): 207 Bar (4:1 burst) Hose Liner: Teflon (PTFE) Outer: Double S304 braid Inlet: Type 60. 200 Bar @ 15°C (AS2473.2) Outlet: 3/8” BSP RH... -
Vendor: Niche Gas ProductsARMA-flex high pressure hose for connecting cylinders to manifolds and point valves Features Part No: NGP 1517-800 Gas: Air MWP (Bar): 207 Bar (4:1 burst) Hose Liner: Teflon (PTFE) Outer: Double S304 braid Inlet: Type 60. 200 Bar @ 15°C (AS2473.2) Outlet: 3/8” BSP...
-
Vendor: Niche Gas Products
Inert Gases, Argon. Type 10. Length: Custom - up to 25 metres
ARMA-flex high pressure hose for connecting cylinders to manifolds and point valves NGP specialises in made to order custom lengths. Because NGP assembles and tests ARMA-flex in the factory, we can make any length (up to approximately 25 metres) and give you a same... -
Vendor: Niche Gas Products
Inert Gases. Type 10. Length: 1.8 metres
ARMA-flex high pressure hose for connecting cylinders to manifolds and point valves Features Part No: NGP1515-1800 Gas: Inert Gases, Argon mixtures MWP (Bar): 207 Bar (4:1 burst) Hose Liner: Teflon (PTFE) Outer: Double S304 braid Inlet: Type 10. 200 Bar @ 15°C (AS2473.2) Outlet:... -
Vendor: Niche Gas Products
Inert Gases. Type 10. Length: 800mm
ARMA-flex high pressure hose for connecting cylinders to manifolds and point valves Features Part No: NGP1515-800 Gas: Inert Gases, Argon mixtures (Not for Oxygen) MWP (Bar): 207 Bar (4:1 burst) Hose Liner: Teflon (PTFE) Outer: Double S304 braid Inlet: Type 10. 200 Bar @... -
Vendor: Niche Gas Products
CO2. Type 30. Length: Custom - up to 25 metres
ARMA-flex high pressure hose for connecting cylinders to manifolds and point valves NGP specialises in made to order custom lengths. Because NGP assembles and tests ARMA-flex in the factory, we can make any length (up to approximately 25 metres) and give you a same... -
Vendor: Niche Gas ProductsARMA-flex high pressure hose for connecting cylinders to manifolds and point valves Features Part No: NGP1514-800 Gas: CO2 MWP (Bar): 207 Bar (4:1 burst) Hose Liner: Teflon (PTFE) Outer: Double S304 braid Inlet: Type 30. 200 Bar @ 15°C (AS2473.2) Outlet: 3/8” BSP RH...
-
Vendor: Niche Gas Products
CO2. Type 30. Length: 1.8 metres
ARMA-flex high pressure hose for connecting cylinders to manifolds and point valves Features Part No: NGP1514-1800 Gas: CO2 MWP (Bar): 207 Bar (4:1 burst) Hose Liner: Teflon (PTFE) Outer: Double S304 braid Inlet: Type 30. 200 Bar @ 15°C (AS2473.2) Outlet: 3/8” BSP RH... -
Vendor: Niche Gas Products
Fuel Gases. Type 20. Length: Custom - up to 25 metres
ARMA-flex high pressure hose for connecting cylinders to manifolds and point valves NGP specialises in made to order custom lengths. Because NGP assembles and tests ARMA-flex in the factory, we can make any length (up to approximately 25 metres) and give you a same... -
Vendor: Niche Gas Products
Fuel Gases. Type 20. Length: 800mm
ARMA-flex high pressure hose for connecting cylinders to manifolds and point valves Features Part No: NGP1562-800 Gas: Fuel Gases MWP (Bar): 207 Bar (4:1 burst) Hose Liner: Teflon (PTFE) Outer: Double S304 braid Inlet: Type 20. 200 Bar @ 15°C (AS2473.2) Outlet: 3/8” BSP... -
Vendor: Niche Gas Products
Fuel Gases. Type 20. Length: 1.8 metres
ARMA-flex high pressure hose for connecting cylinders to manifolds and point valves Features Part No: NGP1562-1800 Gas: Fuel Gases MWP (Bar): 207 Bar (4:1 burst) Hose Liner: Teflon (PTFE) Outer: Double S304 braid Inlet: Type 20. 200 Bar @ 15°C (AS2473.2) Outlet: 3/8” BSP... -
Vendor: Niche Gas Products
Helium. Type 10. Length: Custom - up to 25 metres
ARMA-flex high pressure hose for connecting cylinders to manifolds and point valves NGP specialises in made to order custom lengths. Because NGP assembles and tests ARMA-flex in the factory, we can make any length (up to approximately 25 metres) and give you a same...
