Hose Fittings & Adaptors
-
Vendor: Niche Gas Products
Adaptor 9/16"-18 RH nut to 1/4" NPT
Thread adaptor – 9/16″-18 RH nut to 1/4″ NPT male End 1: 9/16″-18 RH nut with internal conical nipple seat End 2: 1/4″ NPT male Construction: Brass Application: Enables compatibility between 9/16″-18 RH and 1/4″ NPT fittings- $26.20
- $26.20
- Unit price
- per
-
Vendor: Niche Gas Products
Hose kit, 3mm barb with 5/8-18 RH nut
Hose Kit – 3 mm Barb with 5/8-18 RH Nut This hose kit suits mini or micro torches fitted with lightweight hose. The 5/8-18 RH nut is compatible with standard AUS/NZ torches and regulators.- $19.80
- $19.80
- Unit price
- per
-
Vendor: Niche Gas Products
Balloon tilt valve with ¼" NPT male
Balloon Tilt Valve – 1/4″ NPT Male Made from durable latex rubber, this tilt valve allows gas flow when the rubber section is tilted to one side and automatically shuts off when returned to line. Pressure rating: Not for full cylinder pressure; must be...- $55.00
- $55.00
- Unit price
- per
-
Vendor: Niche Gas ProductsTee with Valves – LH After searching extensively for a tee with separate control valves and AUS/NZ connections and finding none available, we decided to make our own. This tee allows two fuel hoses to connect to the same regulator with individual control of...
- $75.00
- $75.00
- Unit price
- per
-
Vendor: Niche Gas ProductsControl Valve, 5/8-18 LH (F–M) In-line fine-control valve 4 mm ways Inlet: 5/8-18 LH nut Outlet: 5/8-18 LH male Flow capacity: 25 L/min @ 100 kPa
- $104.50
- $104.50
- Unit price
- per
-
Vendor: Niche Gas ProductsControl Valve, 5/8-18 RH (F–M) In line fine control valve 4mm ways Inlet: 5/8-18 RH nut Outlet: 5/8-18 RH male Flow capacity: 400 L/pm @ 200 kPa
- $104.50
- $104.50
- Unit price
- per
-
Vendor: Niche Gas ProductsOxygen service. For blanking off regulator outlets etc. Sold as single units
- $13.20
- $13.20
- Unit price
- per
-
Vendor: Niche Gas ProductsFuel gases service. For blanking off regulator outlets etc. Sold as single unitis
- $13.20
- $13.20
- Unit price
- per
-
Vendor: Niche Gas ProductsBlanking Plug – Type 10 (Oxygen Service)A practical way to seal unused cylinders or point valves, helping prevent leaks and keeping contaminants out of the connection. Features a Type 10 nut paired with a solid blank spigot. Weight: 0.2 kg
- $49.50
- $49.50
- Unit price
- per
-
Vendor: Niche Gas ProductsHose Kit, 10 mm ID Fuel 5/8-18 LH nut 10 mm nipple 1-ear Oetiker clip Requires clip to be crimped to the outside of the hose using pincer pliers.
- $10.45
- $10.45
- Unit price
- per
-
Vendor: Niche Gas ProductsConnects 'A' size hoses Some USA suppliers use compact ‘A’ size fittings on specialised lightweight welding hoses. This adaptor bridges the two standards so you can pair these hoses with your existing AUS/NZ equipment. Nut connection: 5/8-18 LH Male thread: ‘A’ size (3/8-24 LH)
- $38.00
- $38.00
- Unit price
- per
-
Vendor: Niche Gas ProductsConnects 'A' size hoses Some USA suppliers use compact ‘A’ size fittings on specialised lightweight welding hoses. This adaptor bridges the two standards so you can pair these hoses with your existing AUS/NZ equipment. Nut connection: 5/8-18 RH Male thread: ‘A’ size (3/8-24 RH)
- $38.00
- $38.00
- Unit price
- per
-
Vendor: Niche Gas Products
Desk mounted on/off valves - Oxy/Fuel
NGP has developed this handy set of dual action valves for the jewellery industry, though they can also be applied wherever individual bench control of gases is required. Ideal for gas systems with more than one operator or bench. Versatile installation: Can incorporate standard...- $148.50
- $148.50
- Unit price
- per
-
Vendor: Niche Gas ProductsConnect 2 oxygen hoses to the same regulator. When operating two torches intermittently, it is recommended to use separate control valves at the tee. This configuration allows pressure to be isolated when not in use, reducing the risk of leaks from hoses or torch...
- $75.00
- $75.00
- Unit price
- per
-
Vendor: Niche Gas ProductsSuitable for a wide range of applications where a low-cost option is required to connect to ¼" NPT. NGP mini valves are rated for use up to 450 psi (31 bar) and are commonly used for equipment drains, spray/nozzle equipment, low-pressure gas systems, and applications where...
- $24.20
- $24.20
- Unit price
- per
-
Vendor: Niche Gas ProductsHose Kt, 10mm ID Oxygen 5/8-18 RH nut 10mm nipple 1-ear Oetiker clip Requires clip to be crimped to outside of hose using pincer pliers
- $10.45
- $10.45
- Unit price
- per
-
Vendor: Niche Gas ProductsBrass Hose Tee – 5 mm IDBrass hose tee for connecting 5 mm ID rubber hoses. Ideal for assembling rubber hose manifolds in gas distribution systems, such as jewellers’ studios. Sealing: Use 1-eared Oetiker hose clips (see our options in this section)
- $10.50
- $10.50
- Unit price
- per
-
Vendor: Niche Gas Products
CGA 024 Size 'C' (7/8"-14) Oxygen hose kit to suit ½" ID hose
Large, heavy-duty cutting blowpipes manufactured in the US typically use the ‘C’ connection to ensure adequate oxygen flow through a ½" ID hose. Kit includes: CGA 024 Size ‘C’ brass nut and 2 × ¼" long ½" nipple- $38.50
- $38.50
- Unit price
- per
-
Vendor: Niche Gas Products
Hose Joiner, 10mm (3/8") ID barb to barb
Connects sections of the same ID hose together. Ideal for permanently extending or replacing a section of hose. Sealing: Use 1-eared Oetiker hose clips- $5.34
- $5.34
- Unit price
- per
-
Vendor: Niche Gas Products
Bulkhead connector, 10mm ID hose - (all gases)
Bulkhead Connector – 10 mm ID Hose (All Gases)Bulkhead adaptor allows connection through a wall, cabinet, or panel. Barbs: 10 mm on both sides to connect 10 mm ID hoses Installation: Plated nut unscrews; push the complete assembly through the hole and reassemble the nut Dimensions: 20 mm diameter...- $46.95
- $46.95
- Unit price
- per
