Products
-
Vendor: Niche Gas Products
Bulkhead connector, 5/8"-18 RH (Oxygen/Inert gases) male (NGP6118)
Bulkhead adaptor allows for connection through a wall, cabinet etc 5/8″-18 RH male threads to connect oxygen, argon, inert, etc welding hoses to both ends 20mm diameter cut-out, maximum wall width, 14mm Plated nut unscrews, push the complete assembly through the hole and re-assemble...- $46.95
- $46.95
- Unit price
- per
-
Vendor: Niche Gas Products
Bulkhead connector, 5mm ID hose - all gases (NGP6152)
Bulkhead adaptor allows for connection through a wall, cabinet etc 5mm barbs both sides to connect 5mm ID hoses to both ends 20mm diameter cut-out, maximum wall width, 14mm Plated nut unscrews, push the complete assembly through the hole and re-assemble the nut Maximum...- $46.95
- $46.95
- Unit price
- per
-
Vendor: Niche Gas ProductsGeneral purpose dual stage regulators. The C750 is a range of general purpose industrial dual stage regulators designed for applications requiring a constant outlet pressure across the full variation of cylinder inlet pressures. A wide range of different outlet pressures, inlet fittings, and outlet...
-
Vendor: Niche Gas ProductsCalibrate your gas analyser with ease, using this regulator set up with ball valve, metered orifice, desk mountable bracket and length of plastic tubing. A gas analyser (Oxybaby, PA 7.0, MAPY) can only deliver accurate results if it is calibrated accurately. All analysers will...
- $260.00
- $260.00
- Unit price
- per
-
Vendor: Niche Gas Products
Calibration kit - Nitrogen & Carbon Dioxide
Calibrate Witt analysers e.g. Oxybaby O2/CO2 versions simply using this double regulator set up with ball valve, metered orifice, desk mountable bracket and length of plastic tubing. Analysers like Oxybaby can only deliver accurate results if it is calibrated accurately. All analysers will drift...- $490.00
- $490.00
- Unit price
- per
-
Vendor: Niche Gas Products
Calibration Kit - With Disposable Gas Cylinder (Nitrogen)
Calibration of your gas analyser is essential for ensuring that your analysis results are accurate. This easy to use calibration system, supplied with a 2.2L disposable gas cylinder, allows you to regularly check the accuracy of your analysis equipment at any time. Suitable for...- $248.00
- $248.00
- Unit price
- per
-
Vendor: Niche Gas Products
Calibration Kit - With Disposable Gas Cylinders (Nitrogen & Carbon Dioxide)
Calibration of your gas analyser is essential for ensuring that your analysis results are accurate. This easy to use calibration system, supplied with a 2.2L disposable gas cylinders, allows you to regularly check the accuracy of your analysis equipment at any time. Suitable for...- $370.00
- $370.00
- Unit price
- per
-
Vendor: Niche Gas Products
Calibration Regulator for CO2/N2 (M10) Disposable Gases, 0-10bar, with 4mm push fit tube outlet
Low pressure regulator with adaptor to fit disposable N2 and CO2 gas cylinders, available for separate purchase from calibration kit- $110.00
- $110.00
- Unit price
- per
-
Vendor: Niche Gas Products
Calibration Regulator for CO2/N2/Ar/O2 (M10) Disposable Gas Cylinders
Calibration Regulator, 0-10 bar, M10 inlet, for Disposable Nitrogen, Argon, Co2 Bottles For use with 2.2L disposable cylinder connections 4mm push-fit tube outlet Ideal for calibration applications- $110.00
- $110.00
- Unit price
- per
-
Vendor: Niche Gas Products
Calibration Regulator, 0-10 bar, M10 inlet, for Disposable Nitrogen, Argon, Co2 Bottles
Change the flare fitting to a push fit (4mm) as per BOM- $110.00
- $110.00
- Unit price
- per
-
Vendor: Niche Gas Products
Can Piercer for Oxybaby [NGP3042]
Can-Piercer for Oxbaby® Accessory for the easy measurement of oxygen and carbon dioxide in bottles and cans of various sizes in combination with the analyser Oxybaby®. There are a range of variations available depending on whether your requirement is to pierce cans or bottles... -
Vendor: Niche Gas Products
Cap for MAPP fuel gas cylinder, brass with washer
Seal your MAPP gas fuel cylinder when not in use. Also helps to protect the thread. Fits all standard MAPP gas cylinders (not Oxygen) Rubber seal Made from brass Internal diameter: 23.5mm Thread: 1"-20 UNF (CGA 600)- $9.50
- $9.50
- Unit price
- per
-
Vendor: UNIWELD
Cap'n Hook, 17 flames brazing tip. Brazing up to 3". Oxy/Fuel
The patented Cap’n Hook Brazing Tip delivers concentrated heat up to 3100°C.Its unique 40° flame angle directs heat onto the copper tube and away from sensitive components, reducing the risk of accidental damage. With 100% wraparound coverage, you get fast, even heat distribution every...- $195.00
- $195.00
- Unit price
- per
-
Vendor: Niche Gas Products
Cap'n Hook, 5 flames brazing tip. Brazing up to 1". Oxy/Fuel
The patented Cap’n Hook Brazing Tip delivers concentrated heat up to 3100°C.Its unique 40° flame angle directs heat onto the copper tube and away from sensitive components, reducing the risk of accidental damage. With 100% wraparound coverage, you get fast, even heat distribution every...- $130.00
- $130.00
- Unit price
- per
-
Vendor: Niche Gas Products
Cap'n Hook, 5 flames brazing tip. Brazing up to 1". Oxy/Fuel. Harris 196 torch
The patented Cap’n Hook Brazing Tip delivers concentrated heat up to 3100°C.Its unique 40° flame angle directs heat onto the copper tube and away from sensitive components, reducing the risk of accidental damage. With 100% wraparound coverage, you get fast, even heat distribution every...- $110.50
- $110.50
- Unit price
- per
-
Vendor: Niche Gas Products
Cap'n Hook, 9 flames brazing tip. Brazing up to 2". Oxy/Fuel
The patented Cap’n Hook Brazing Tip delivers concentrated heat up to 3100°C.Its unique 40° flame angle directs heat onto the copper tube and away from sensitive components, reducing the risk of accidental damage. With 100% wraparound coverage, you get fast, even heat distribution every...- $165.00
- $165.00
- Unit price
- per
-
Vendor: Niche Gas Products
Carbogen - Yoke to 5/8-18 [NGP2007]
FLEX-Coil Medical Carbogen Inlet: Yoke (Pin Index) - Carbogen Outlet: 5/8-18 nut Materials Yoke – Aluminium Tube – copper Nipple – brass Nut – brass Cleaned for Oxygen service -
Vendor: Niche Gas ProductsFLEX-Coil Medical Carbogen Inlet: Yoke (Pin Index) - Carbogen Outlet: M28x1.5 nut Materials Yoke – Aluminium Tube – copper Nipple – brass Nut – brass Cleaned for Oxygen service
-
Vendor: Niche Gas ProductsFeatures. Part no: NGP Length : 1.8 meter Hose Liner: Teflon (PTFE) MWP Bar: 200 Inlet (Cylinder): Type 30 Outlet (female): 3/8” BSP RH
-
Vendor: Niche Gas ProductsFeatures. Part no: NGP 1549 Length : 800 (mm) Hose Liner: Teflon (PTFE) MWP Bar: 200 Inlet (Cylinder): Type 30 Outlet (female): 3/8” BSP RH
![Can Piercer for Oxybaby [NGP3042]](http://www.nichegas.com.au/cdn/shop/files/CanPiercer_785x.png?v=1740528934)
![Carbogen - Yoke to 5/8-18 [NGP2007]](http://www.nichegas.com.au/cdn/shop/products/Oxygen-Yoke-to-M18-NGP2012_c7798e3b-24e1-47c7-bca7-98f22a1c5527_670x.jpg?v=1701248657)
