Products
-
Vendor: Niche Gas ProductsThe analysis of your MAP may seem straight forward, however, there is some important things you should consider before making a decision about what type of analyser you require. For more information, be sure to contact us to discuss your requirements.
-
Vendor: Niche Gas ProductsType 30 Cylinder Connector Thread: 0.860″ WHIT RH, 14 TPISealing: Flat-end sealing face, thread O.D. 21.8 mmGases: Carbon dioxide, nitrous oxideKits Include: Type 30 nylon washerStandard: Manufactured to AS 2473.2
- From $2.20
- From $2.20
- Unit price
- per
-
Vendor: Niche Gas ProductsFLEX-Coil Medical Carbon Dioxide Inlet: Yoke (Pin Index) - CO2 Outlet: M26x1.5 nut Materials Yoke – Aluminium Tube – copper Nipple – brass Nut – brass Cleaned for Oxygen service
-
Vendor: Niche Gas Products
CO2 and Inert Auto changeover manifold
INFINITY auto changeover manifold senses a depleted cylinder and automatically switches to the reserve cylinder. Finally a low cost system that is incredibly reliable and works. Add one cylinder or many per side and never run out of gas again Combine the Infinity with... -
Vendor: Niche Gas Products
CO2. Type 30. Length: 1.8 metres
ARMA-flex high pressure hose for connecting cylinders to manifolds and point valves Features Part No: NGP1514-1800 Gas: CO2 MWP (Bar): 207 Bar (4:1 burst) Hose Liner: Teflon (PTFE) Outer: Double S304 braid Inlet: Type 30. 200 Bar @ 15°C (AS2473.2) Outlet: 3/8” BSP RH... -
Vendor: Niche Gas ProductsARMA-flex high pressure hose for connecting cylinders to manifolds and point valves Features Part No: NGP1514-800 Gas: CO2 MWP (Bar): 207 Bar (4:1 burst) Hose Liner: Teflon (PTFE) Outer: Double S304 braid Inlet: Type 30. 200 Bar @ 15°C (AS2473.2) Outlet: 3/8” BSP RH...
-
Vendor: Niche Gas Products
CO2. Type 30. Length: Custom - up to 25 metres
ARMA-flex high pressure hose for connecting cylinders to manifolds and point valves NGP specialises in made to order custom lengths. Because NGP assembles and tests ARMA-flex in the factory, we can make any length (up to approximately 25 metres) and give you a same... -
Vendor: Niche Gas Products
Comweld Mediselect Oxygen Therapy 1-15 lpm
One of the best medical Oxygen regulators on the market from Comweld. Rest assured, it has TGA approval Pin Index connection for medical Oxygen 0-15 lpm click adjustment accurately selects the flow. Read this in two spots depending on your view. Three sections independently...- $285.00
$550.00- $285.00
- Unit price
- per
-
Vendor: Niche Gas ProductsBenefits: analogue Control Unit designed to optimize the use and properties of WITT MFC gas mixing systems only 1 AWE required for each 2-gas MFC mixer integrated power supply – no external mains adapter for the MFC’s required display of actual value freely scalable...
-
Vendor: Niche Gas ProductsControl Valve, 5/8-18 LH (F–M) In-line fine-control valve 4 mm ways Inlet: 5/8-18 LH nut Outlet: 5/8-18 LH male Flow capacity: 25 L/min @ 100 kPa
- $104.50
- $104.50
- Unit price
- per
-
Vendor: Niche Gas ProductsControl Valve, 5/8-18 RH (F–M) In line fine control valve 4mm ways Inlet: 5/8-18 RH nut Outlet: 5/8-18 RH male Flow capacity: 400 L/pm @ 200 kPa
- $104.50
- $104.50
- Unit price
- per
-
Vendor: Niche Gas ProductsCurved Tip #2For Oxy/Acetylene & Oxy/Hydrogen with sapphire insert. Curved tip for use with oxy/acetylene and oxy/hydrogen systems. For tip sizes #2–3, the small orifice diameter is achieved using a laser-drilled synthetic sapphire insert to maintain accurate gas flow and consistent flame characteristics. Specifications...
- $49.50
- $49.50
- Unit price
- per
-
Vendor: Niche Gas ProductsCurved Tip #3For Oxy/Acetylene & Oxy/Hydrogen with sapphire insert Curved tip for use with oxy/acetylene and oxy/hydrogen systems. For tip sizes #2–3, the small orifice diameter is achieved using a laser-drilled synthetic sapphire insert to assure accurate gas flow and consistent flame characteristics. Specifications...
- $49.50
- $49.50
- Unit price
- per
-
Vendor: Niche Gas ProductsCurved Tip #4 Copper swaged tip with chrome plated nut. Specifications Mixing Tube Diameter: 3 mm Length: 38 mm
- $33.00
- $33.00
- Unit price
- per
-
Vendor: Niche Gas ProductsCurved Tip #5 Copper swaged tip with chrome plated nut. Specifications Mixing Tube Diameter: 3 mm Length: 38 mm
- $33.00
- $33.00
- Unit price
- per
-
Vendor: Niche Gas ProductsCurved Tip #6 Copper swaged tip with chrome plated nut. Specifications Mixing Tube Diameter: 3 mm Length: 38 mm
- $33.00
- $33.00
- Unit price
- per
-
Vendor: Niche Gas ProductsCurved Tip #7 Copper swaged tip with chrome plated nut. Specifications Mixing Tube Diameter: 3 mm Length: 38 mm
- $33.00
- $33.00
- Unit price
- per
-
Vendor: Niche Gas ProductsThe NGP Cutskil CO2 Side Inlet Regulator is specifically designed for the budget conscious buyer, CutSkil regulators offer excellent quality and performance for use with most light to medium applications. CutSkil CO2 regulators conform to AS4267 and are factory set to deliver a correct...
- $120.00
$150.00- $120.00
- Unit price
- per
-
Vendor: Niche Gas Products
Cutskill Acetylene Regulator 0-1.5 bar
The CutSkill Acetylene Vertical Inlet Regulator is specifically designed for the budget conscious buyer, CutSkill regulators offer excellent quality and performance for use with most light to medium applications. CutSkill Acetylene regulators conform to AS4267 and are factory set to deliver the correct maximum...- $120.00
$150.00- $120.00
- Unit price
- per
-
Vendor: Niche Gas Products
Cutskill Argon Regulator Flowmeter For MIG & TIG
The CutSkill Side Inlet Regulator Flowmeter provides accurate indication of flow rate of shielding gases for MIG and TIG welding processes. The Regulator/Flowmeters have been designed for TIG processes and for MIG, Short Arc and Spray Arc applications and are calibrated for O to...- $60.00
$95.00- $60.00
- Unit price
- per
![CO2 - Yoke to M26 [NGP2015]](http://www.nichegas.com.au/cdn/shop/products/Oxygen-Yoke-to-M18-NGP2012_ae90080b-ea2e-4c55-94aa-873cf2f830dd_670x.jpg?v=1701248785)
